semiautomatic Blow Molding Machine
. Engineering item:
1.Capacity: 200-300pcs/hr (based on 10L)
2.Capacity: 400-600pcs/hr (based on 5L)
2. Max volume of product: 10 liter
. Description:
Technique Parameter of blow molding machine:
Trait:
GMS-10L-1C semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi- auto mode.
The machine is small with low investment, easy and safe to operate by one person.
main parameters:
| Model NO. |
GMS-10L-1C |
| Theoretical Output |
300pcs/hr |
| Max.Container Volume |
12L |
| Max. Neck Diameter |
80mm |
| Max. Container Diameter |
260mm |
| Max. Container Height |
430mm |
| Mold Thickness |
260-430mm |
| Number Of Cavity |
1 cavity |
| Use Power |
12kw |
| Working Pressure |
1.0mpa |
| Blow Pressure |
<3.0mpa |
| Machine Size |
2x0.77x1.77m |
| Machine Weight |
0.65T |
| Heater Size |
1.7x0.6x1.34m |
| Heater Weight |
0.2T |
GMN-213
Audited Supplier 
){kind=link}
){kind=link}