GMS-800:
Product max volume:2L
Suitable for blowing bottles between 150ml to 2000ml
Necessary auxiliary devices:High pressure air compressor, Air filter.
Semi-automatic blow moulding machine
- Use integated mic computer controler,with OMRON control chip,the response speed is very quickly and the timing very precisely.Use life durable and failture rate very low.It's the revolutionary product of industrial control.
- High responsivenesspneumatic components,action timely and precisely
- Thorough safe operation mechanism,start-up with two hands,avoid the accident during the operation
- Infrarted heating technology,safe and energy conservation,no pollution of the environment.With the 8 rates adjustable temperature controler,make the temperature suitable for blowing.
Technology advantage:
- Special design,high rigid compound die structure
- Wide adaptability, suitable for every type mould thickness
- Adjust convenience
- No mould rolling out
- More energy conservation,no need much air supply
- High burnish principal axis, with very precise polishing, light action and low noise.
- Short mould stroke,quick action
- All ZG45 casting, with long timing process,very small transformation,can meet your precise request 100%
- Hig dead-weigh, ensure the steady during the operation
Main parameters :
Main machine (blowert + oven) |
Model type |
Tech data |
| Product Spec |
Max. product volume(L/cav) |
2 |
| Max. preform neck size(mm) |
100 |
| Max. product diameter(mm) |
180 |
| Max. product height (mm) |
300 |
| Cavities |
2 |
| Blow molding part |
Die force (KN) |
100 |
| Die stroke (mm) |
270 |
| Max. mould size(mm) |
390*345 |
| Mould thickness |
Adjustable |
| Mould spacing(mm) |
|
| Max. pulling stroke(mm) |
400 |
| Operation pressure(Mpa) |
0.8-1.0 |
Operation air pressure consumption
(1tr/min) |
200 |
| Blow pressure(Mpa) |
1.2-2.8 |
| Blow air pressure consumption (1tr/min) |
300 |
| Output(pcs/h) |
800-1000 |
| Machine size(LxWxH)(m) |
1.46*0.58*1.8 |
| Machine weight(KG) |
650 |
| Oven |
Temperature grade(rate) |
8 |
| Heating time(S) |
90-200 |
| Voltage(V) |
220 or as your request |
| Frequency(HZ) |
50/60 |
| Total power(KW) |
16 |
| Oven Size (LxWxH) |
1.60*0.55*1.40 |
| Oven weight (KG) |
200 |
Features:
- Adopt the new type double bend arm and four pull rod-clamping structure (won the patent). Cross direction; middle mould board is move parallel; the distance between two mold bases is adjusted by the chain wheel. Thus, the clamping force is very strong.
- The machine frame is produced by the whole complete casting bottom, so that the machine is firm and running stable.
- Adopt the straight slide way, reduce the friction and lengthen the life of the machine.
- Double start working button, which is designed for avoiding the injury.
- Power saving design that can increase your profits.
- The single direction of pre-form placing and bottle picking, which increase the output.
- Segregate type air controlling system, which is designed for avoiding waste pollution.
- The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.
- Technical Parameter:
| GENERAL INFO |
YD-1500 |
| Theoretial output |
700~1500PCS/hr |
| Heating capacity |
9.8kw |
| Max bottle volume |
1.5L(2 cav) |
| Blowing pressure |
≤3.5Mpa |
| Motion Pressure |
≤1.0Mpa |
| Max*deameter*height |
Ø 140XH340mm |
| Mould thickness |
120~220mm |
| Weight |
850kg |
| Main Machine |
1450*700*1750mm |
| Heater |
1800*750*1400mm |
Audited Supplier 
){kind=link}
){kind=link}