Description of automatic PET bottle making machine/blowing molding machine
Computer control system ,stable performance; Preform feeding system; Infrared heating uniform and quick; Each movement has self-locking system ,if one of the processes has problem, the procedure will success safe mode; All of the movements are driven by cylinders, clean and no noise; High pressure clamping; Easy to set up, operate and repair, safe, health high efficiency and yield.
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
| Item |
GM-4C |
| Bottle type specification |
Cavity |
4 |
| Theory output |
3000-4500 |
| Max. volume |
2L |
| Bottle mouth maximum overall diameter |
28-38mm |
| Bottle biggest diameter |
100mm |
| Bottle maximum height |
330mm |
| Power specifications |
Light tube quantity |
32pcs |
| Light tube power |
1.25KW |
| Maximum heating power |
40KW |
| All electric machine installation |
43KW |
| Actual consumption |
21.5KW |
| Air pressure specification |
Work pressure |
7-9kg/ cm2 |
| Low-pressure gas consumption |
1600L/min |
| Blow bottle pressure |
25-35kg/c |
| Higher -pressure gas consumption |
3000Ltr/min |
| Frozen water specification |
Work pressure |
5-6 kg/c |
| Temperature range |
10ºC |
| Consumption |
8000kcal/hr |
| Frozen water flow |
88L/min |
| Machine specification |
Size of the machine |
4.5x1.6x1.9 |
| Weight of the machine |
3.5ton |
GM-0005
Audited Supplier 
){kind=link}
){kind=link}