Description of the machines Automatic Monobloc Wine Filling Line
Profile
1. function
This machine is used for washing and filling glass bottles and sealing aluminum caps. It is suitable for the filling of beverage and wine. It has the characteristics of good sealing quality, compact structure, low noise and convenient operation and maintenance.
2. Process flow
Glass bottle after for screw is widening gap import smoothly into the bottle round, was set to blunt bottle machine bottle clamp, and is clamped turn 180 degrees after rinse, dry ideas, and is, by the thumbwheel into filling machine, bottle through ascension, open the valve, filling and closing valve, the bottles fell after finished the process of filling, the thumbwheel to sealing machine, at the same time cap sorter will straighten out the slide into cover, spindle back wheel clockwise, screw LIDS pressure drop will cover, then covering up, by the bottle bottle thumbwheel to lose bottle chain output.
3. Structural features
frame
Structural steel body, appearance for 304 stainless steel layer, 304 stainless steel frame, stainless steel adjustable foot.
Delivery system
Adopt bottle-holding bottom conveying, bottle-feeding screw, stable conveying, stainless steel conveying chain, oil nylon wheel and guide plate.
Bottle lifting device adopts bottle CAM lifting.
Rotary bottle washing part
The number of bottle washing collet is 24. The bottle collet is clamped on the neck and the bottle body at the same time to ensure that the glass bottle can be turned over freely.
The head can be raised and lowered to adapt to different heights of the bottle.
Rotary filling part
The number of filling valves is 24. High-speed filling valves are adopted with no leakage and the liquid level error is less than ±5mm.
Adopt bottle lifting device to offset the height error between glass bottles. And has the pre-cover device, makes the bottle when lifting good, stable and reliable.
The filling cylinder can be raised and lowered to accommodate different heights of bottles.
Capping part
Capping head number 6, four knife rolling aluminum cover principle, of which two knife seal thread, the other two knife seal anti-theft ring, when the rolling pressure is too large to use spring unloading, with no injury cover , Sealing tight and reliable features.
Capping head with a pre-cover function, effectively calibrate the glass bottle, improve the sealing pass rate.
Sealing head can lift to accommodate bottles of different heights.
transmission part
All the transmission gear meshing with each other are used metal gear and oil nylon gear meshing, greatly reducing the noise, the whole transmission is more stable.
control system and operation panel
Sealed electronic control box, 304 stainless steel, imported PLC, inverter, relays, photoelectric switches, sensor switch relay components, touch screen control panel, the import of pneumatic components.
Main parameters:
| Model |
VAGF-6000 |
| Capacity |
6000bph based on 0.5L glass bottle |
| Washing heads |
24 |
| Filling heads |
24 |
| Aluminum capping heads |
8 |
| Filling valve |
Normal pressure filling for water |
| Power |
3kw |
| Dimension |
2800*2300*2700mm |
| Weight |
4500kgs |
M25-0983
){kind=link}