| Customization: | Available |
|---|---|
| Warranty: | 12m |
| Type: | Extrusion Blow Molding Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Extruder | ||
| 1 | Screw diameter | 82mm |
| 2 | L/D ratio | 25:1 |
| 3 | Screw speed | 40-80r.p.m. |
| 4 | Drive motor | Frequency 30kw 6level/Siemens |
| 5 | frequency control | LITEON |
| 6 | Heating section with air cooling | 4 |
| 7 | output | 150kg/h(PC granules) |
| 8 | Heating power | 4X7.2 (=28.8) kw |
| 9 | Vertical adjust range | 450mm |
| 10 | Forward and backward adjust range | 550mm |
| 11 | Feeding section force cooling set | NO |
| 12 | Reducer case | Guomao(200) |
| 13 | Security platform, ladders and safety rail | yes |
| Note :material:HDPE Such as:6888 model | ||
| Die head | ||
| 1 | Accumulator capacity | 4L(3kgHDPE) |
| 2 | structure | First in first out |
| 3 | number of heating zone | 4section |
| 4 | Heating power | 10.5kw |
| 5 | Max diameter | 150mm |
| 6 | Injection force | 200mm |
| 7 | Injection force test | electronic ruler( Italy) |
| 8 | Injection pressure | 10Mpa |
| 9 | Ext ruder stop | You can control stop bin level or bin full |
| CLAMPING UNIT | ||
| 1 | pull | Diagonal double pull |
| 2 | Mould size | 760(W)X660(H) |
| 3 | Min Mould thickness | 410mm |
| 4 | Clamping force | 220KN |
| 5 | Opening and closing | 400-900mm |
| 6 | Max die size | 600×700mm |
| 7 | Opening and closing test | Close to switch |
| 8 | valve | North-man,YUKEN |
| 9 | Cylinders number | 2 |
| 10 | High pressure | 14mpa |
| 11 | Mould moving support part | guide |
| Hydraumatic system | ||
| 1 | Oil pump motor | 15Kwservo motor |
| 2 | hydraumatic valve | Taiwan North-man |
| 3 | hydraumatic pump | SUMITOMO servo(50pump) |
| 4 | Joint,tubing | TAIWAN |
| 5 | sealing | TAIWAN |
| 6 | Tank volume | 180L |
| 7 | Working pressure | 12mpa |
| 8 | Oil cooling water | yes |
| 9 | Oil temperature and oil level control | Oil temperature test and alarm, oil level by level gauge |
| Pneumatic system | ||
| 1 | Working pressure | 0.7mpa |
| 2 | Blowing pressure | 0.6mpa |
| 3 | Blowing needle blow | High and low pressure control |
| 4 | Blowing at intervals | yes |
| 5 | Die blowing | yes |
| 6 | Electromagnetic valve of pneumatic system | Taiwan(AIRTEC) |
| 7 | exhausting with high speed | yes |
| .Modeling control | ||
| 1 | controller | GEFRAN300spot |
| 2 | Servo valve | ATOS(Italy) |
| 3 | servo-cylinder | With die head |
| 4 | hydraulic part | variable displacement piston pump, YUKEN |
| Electric | ||
| 1 | Cont actor | famous brand |
| 2 | Total capacity(about) | 78kw |
| 3 | Average energy consumption(about) | 35kw |
| Cooling water | ||
| 1 | Cooling water for machine | 5000L/hr |
| 2 | Cooling water for mold | 2500L/hr |
| Air consumption | ||
| 1 | Compress air consumption | 1.2m3/min |
| PLC control | Italy GEFRAN | |
| 2 | Operation floor | Italy GEFRAN |
| 3 | Recipe storage | yes |
| Heating control | ||
| 1 | Heating main element | Intermediate relay+cont actor |
| 2 | control | PLC control |
| 3 | thermocouple type | K type |
| 4 | Upper and lower alarm | yes |
| 5 | Screw cold Start protection control | yes |
| 6 | thermocouple and heating wire break alarm | Have thermocouple wire break alarm,heating wire break alarm (you can choose) |
| 7 | Preheating function | yes |
| Mould core and and mould set | ||
| 1 | Mould core and mould set | Customer supply die size |
| 2 | Material for test machine | Customer supply |
| 1 | Blow down(hydraumatic)and packing(air-operated) | Lift down blow |
| 2 | manipulator | yes |
| 3 | Outside size(M) | 4.8×2.5×3.9(L×W×H) |
| Machine weight(T) | 11.8 | |
){kind=link}