Equipment composition
The equipment is composed of skeleton, spindle, water pump, electric appliance, etc. All pneumatic devices, running balance, easy to operate, reliable adjustment. The automatic barrel is composed of a barrel blocking cylinder, a barrel pushing cylinder and a barrel jacking cylinder. The automatic lowering of the barrel is completed by the tilting cylinder driving the tilting plate.
Working principle
After the transmission line starts to run, when all 7 barrels reach the upper barrel position, the barrel cylinder extends to block the rear barrel, the barrel cylinder pushes the 7 barrels into the upper barrel flip plate, and the top barrel cylinder then flattens the flip plate up and down, so that the barrel slides into the bottle holder. The main engine drives the long nozzle in the barrel under the action of the transmission mechanism, the water jet pump is a high pressure pump, in addition to the transmission motor
Under the action of the structure, the press barrel device is driven to drive the rotation of the barrel, so as to ensure that the inner wall of the barrel can be comprehensively cleaned under the impact of high pressure water flow, making the inner wall of the barrel more clean and sanitary. After the high pressure washing, the barrel is turned over and slid to the delivery line of the barrel, and the whole process is over. Suitable for 5-gallon drums.
Specific flushing procedure
7 barrels are loaded at one time, the barrel is 180 degrees, the new 3-step method is used to load the barrel flat and bottle structure design, the upper barrel frame is designed to fully surround the barrel structure. The main shaft rotates 90 degrees to make the barrel vertical upside down, press the cylinder of the bottom power device to work, lift the nozzle to the mouth of the barrel, the high pressure pump works, and the bottom power device works at the same time. The nozzle lifting device is lifted to the bottom of the barrel, close to the bottom of the barrel, the sensor is sensed after the pause, the flushing time can be adjusted. The nozzle lifting device runs down, runs to the shoulder position of the bucket, stops again, and the time can be adjusted. Specially designed to wash the shoulder of the barrel, to ensure that the bottom of the barrel, the shoulder of the barrel, the mouth of the barrel and other parts of the washing, this washing process can be recycled 2-3, according to the actual situation can be adjusted. After the washing action is completed, the bucket is drip-dried, and the drip-drying time is adjustable. When drip-drying is complete, run the spindle 90 degrees forward.
| washing heads |
7 |
| capacity |
1000bph |
| bottle |
5gallon |
| power |
380v,3ph,50hz,23kw |
){kind=link}
){kind=link}